Toshiba 65H93 - Manual (Page 26)

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 26
Using the remote control 3
Note:
The error message “Not Available” will
appear if you press a key for a function
that is not available.
CT-90168
VCR + REC
+
PAGE –
ACTION
ENTER
MENU THEATER
NET
FAV
SPLIT POP DIRECT CH FREEZE
SWAP CH SCAN SOURCE
POP CH
–
100
+10
The buttons used for operating the TV only are described here. For a complete list
of the remote control’s functions, see the remote control functional key chart on
pages 28–29.
POWER turns the TV on and off
SLEEP accesses the sleep timer (page 82)
LIGHT The first press of the LIGHT button lights the keypad and turns on the
Illumination mode. With the Illumination mode on, pressing any other key lights the
keypad for 5 seconds (10 seconds if you’re in programming mode). Subsequent presses
of the LIGHT button toggle between turning the Illumination mode on and off.
Channel Numbers (0–9, 100) directly access channels (page 42)
MODE cycles through the six device modes: TV, CABLE/SAT, VCR, DVD, AUDIO1,
and AUDIO2. The mode indicator light will remain lit for a few seconds (page 20).
PIC SIZE cycles through the five pictures sizes: Natural, Theater Wide 1/2/3, and Full
(page 64)
THEATER NET accesses the on-screen IR device control icons (page 46)
MENU accesses the menu system (page 35)
GUIDE opens the TV Guide On Screen system (page 53)
INFO provides detailed information on highlighted items (page 55)
BLUE and GREEN buttons select menu-specific functions in the TV Guide On Screen
system (page 55)
ENTER sets menu adjustments
yz x • select or adjust programming menus
FAV accesses the favorite channel search function (page 44)
CH yz cycles through programmed channels when no menu is on-screen (page 42);
functions as page up/down when a menu is on-screen or when the TV Guide
On Screen system is open (page 53)
VOL yz adjusts the volume level
EXIT closes on-screen menus and the TV Guide On Screen system
CH RTN returns to the last viewed channels (page 63)
INPUT selects the video input source (page 61)
RECALL displays TV setting information on-screen (page 83)
MUTE reduces or turns off the sound (page 76)
TV/VCR press to select TV mode to view one program while recording another
SPLIT turns the POP feature on and off (page 68)
POP CH yz selects the POP (picture-out-picture) channel (page 68)
POP DIRECT CH allows direct access to POP channels (page 68)
FREEZE freezes the POP picture (page 69)
SWAP switches the main and POP pictures (page 69)
CH SCAN allows access to the programmed channel search function (page 70)
SOURCE selects the POP picture source (page 68)
Learning about the remote control