Installing the remote control batteries – Toshiba 65H93 User Manual

Page 27

Chapter 3: Using the remote control

MODE

Device mode control after programming

Toshiba TV

CABLE/SAT Multi-brand Cable, Satellite
VCR

Multi-brand VCR, DVD, LD, Cassette

DVD

Multi-brand DVD, VCR, LD, Cassette

AUDIO 1

Multi-brand Audio: Amp., Tuner, Misc.Audio, CD/MD

AUDIO 2

Multi-brand Audio: CD/MD, Amp., Tuner, Misc. Audio

Note:
Although your new TV’s remote control includes
codes for many devices, it may not include
codes for some or all of the features on certain
devices you wish to control. If you are unable to
program the TV’s remote control to operate
your device or some of the features on that
device, use the device’s remote control or the
controls on the device.

MODE

–

ACTION

ENTER

MENU

THEATER

NET

FAV

–

100

+10

Your TV remote control has one dedicated TV mode and five programmable
multi-brand modes: CABLE/SAT, VCR, DVD, AUDIO 1, and AUDIO 2.
The default device modes and programmable device modes are listed below.

Note: The TV remote control is preprogrammed to operate most Toshiba devices.
If you own a non-Toshiba device or a Toshiba device that the remote control is not
preprogrammed to operate, you will need to program the remote control. See
“Programming the remote control to operate your other devices” on page __.

MODE

Default device mode control (before programming)

Toshiba TV

CABLE/SAT Toshiba Satellite receiver
VCR

Toshiba VCR

DVD

Toshiba DVD

AUDIO 1

Pioneer Audio receiver

AUDIO 2

Pioneer LD

Using the remote control MODE button to control other devices

Caution:
• Dispose of batteries in a designated disposal

area.Do not throw batteries into a fire.

• Do not mix battery types or combine used

batteries with new ones.

• If the remote control does not operate

correctly, or if the operating range becomes
reduced, replace both batteries with new
ones.

• If the batteries are dead or if you will not use

the remote control for a long time, remove
the batteries to prevent battery acid from
leaking into the battery compartment.

To install the remote control batteries:

1. Slide the battery cover off the back of the remote control.

2. Install two “AA” size alkaline batteries. Match the + and – symbols on the

batteries to the symbols on the battery compartment.

3. Slide the battery cover on to the remote control until the lock snaps.

Installing the remote control batteries

This manual is related to the following products:

57H93