beautypg.com

Lamp replacement (continued) – Toshiba TDP-ET10 User Manual

Page 50

background image

50

CAUTION

• If you have been using the projector, the lamp will be very hot, and may cause burn

injuries.
Wait for the lamp to cool (for longer than 1 hour) before replacing it.

• If the lamp should break, please handle with care to avoid injury due to broken pieces

and contact your dealer for repair service.

1

Unplug power cord.

2

Wait until lamp is suffi ciently cooled.

Wait for at least 1 hour.

3

Keep the projector stationary.

Do not move the projector while replacing the
lamp.

4

Remove the lamp cover.

Loosen the two screws and raise the lamp
cover.
If necessary, use a screwdriver or other small
tool to remove the cover. Use care to avoid
damaging your fi ngers.

5

Remove the lamp.

Loosen the three lamp locking screws and pull
up the handle to release the lamp. Remove the
lamp.

Lamp replacement (Continued)