Toshiba TDP-ET10 - Manual (Page 34)

34
MENU LANGUAGE
DVD menu language can be selected in this menu.
(1) Select MENU LANG in LANGUAGE SETUP page and press or key.
(2) Press key to select DVD menu language and press key.
■
Notes
Some DVD video discs may not include your pre-selected language. In this case, the DVD
video player automatically displays disc menus consistent with the disc’s initial language
setting.
Playing a disc.
1. Basic playback
(1) Turn on the power and select DVD input.
(2) The DVD startup screen will appear on the screen.
(3) Load the disc in the disc slot with the label side facing up. (If the disc has a label.)
Hold the disc without touching either of its surfaces, align it with the guides, and place
it in position.
(4) “READ” appears on the screen, then playback starts.
• A menu screen will appear on the screen, if the disc has a title menu.
• Press on the remote control to select title, then press key. Title is selected
and play commences.
(5) Press VOL [+] [-] to adjust the volume.
• When using an amplifi er, adjust the volume with the amplifi er.
(6) Press / or to end playback.
■
Notes
Insert a disc horizontally into the DVD disc slot, do not jam or force it strongly, otherwise
the DVD may malfunction or the disc might be damaged.
CAUTION
Never insert your fi nger into the disc hole when load the disc to the disc slot. Keep your
fi ngers well clear of the disc slot when disc is loading or unloading. Neglecting to do so
may cause personal injury.
TDP-ET20 DVD Playback (Continued)