Tripp Lite RACKMOUNT B020-U16-19-K - Manual (Page 2)

1. Features 3
2. System Requirements 3
2.1 Computer 3
2.2 Console 3
2.3 Cables 3
3. Introduction 4
3.1 Front View of Console KVM Switch 4
3.2 Rear View of Console KVM Switch 5
3.3 Front View of B022-U16 5
3.4 Rear View for B022-016 6
4. Installation 6
4.1 Pre-Installation Safety Instructions 6
4.2 Rackmounting Instructions for Console KVMs 7
4.3 Rackmounting for B022-U16 8
4.4 Grounding 8
4.5 Single-Station Installation 8
4.6 Multiple-Station (Daisy-Chained) Installation 8
4.7 Multiple Station (Cascaded) Installation 9
4.8 Hot Plugging 9
5. Basic Operation 9
5.1 Opening the NetDirector Console KVM 9
5.2 Closing the NetDirector Console KVM 9
5.3 LCD OSD (On-Screen Display) Configuration 10
5.4 Sharing USB Peripheral Devices 10
5.5 Powering Off and Restarting 10
6. Hotkeys 11
6.1 Invoking the Hotkey Mode 11
6.2 Port ID Numbering 11
6.3 Selecting the Active Port 11
6.4 Auto Scanning 12
6.5 Starting Auto Scan 12
6.6 Pausing in Auto Scan 12
6.7 Skip Mode 12
6.8 Hotkey Beeper Control 12
6.9 Computer Keyboard/Mouse Reset 12
6.10 Quick Hotkey Control 13
6.11 OSD Hotkey Comtrol 13
6.12 Port OS Control 13
6.13 Restore Default Values 13
6.14 Hotkey Summary Table 13
7. OSD (On-Screen Display) Operation 14
7.1 OSD Overview 14
7.2 Logging-In for the First Time 14
7.3 OSD Invocation Sequence 14
7.4 OSD Navigation 14
7.5 OSD Main Screen Headings 14
7.6 OSD Functions 15
8. Firmware Upgrade Utility 18
8.1 Before You Begin 18
8.2 Starting the Upgrade 19
8.3 Upgrade Succeeded 19
8.4 Upgrade Failed 19
8.5 Firmware Upgrade Recovery 20
9. Appendix A 20
9.1 Specifications 20
9.2 OSD Factory Default Settings 21
9.3 Keyboard Emulation (Mac & Sun) 21
10. Appendix B 22
10.1 FCC Radio/TV Interference Notice 22
11. Warranty 22
12. Warranty Registration 22
Table of Contents
2
201011080 • 932900-EN.indd 2 11/29/2010 4:30:10 PM