Quantum Audio Travan 40 Tape Drive STT3401A User Manual
Page 40
Chapter 5
ATAPI Interface
Page 32
Seagate Travan 40 Product Manual
ANSI Version: This field indicates the ANSI compliance level. A value of 001b
indicates compliance with SCSI Standard X3.131-1986. A value of 010b indicates
compliance with QIC-121 (SCSI-2).
TrmIOP: Terminate I/O message is supported. The Term I/O bit shall be set to 1.
Response Data Format: This field will have a value of 2h to indicate compliance
with the QIC-121 (SCSI-2) inquiry data format, or a value of 1h to indicate the
SCSI-1 option has been selected.
Additional Length: This field indicates that there are 31 (1Fh) bytes following this
byte.
Sync: The Sync bit is always set to 1, indicating the drive supports synchronous data
transfer.
Vendor Name: Bytes 8-0Fh are set to the ASCII values for the Vendor Name per the
table below.
Product Name: Bytes 10-1Fh are set to ASCII values for the Product Name. See the
table below.
Vendor name
( _ = space)
Product name
Drive description
“Seagate_”
“STT3401A”
Travan 40 drive
Firmware Revision Level: Bytes 20h-23h contain Firmware Revision.