Quantum Audio Travan 40 Tape Drive STT3401A - Manual (Page 27)

Drive operation and maintenance Chapter 4
Seagate Travan 40 Product Manual Page 19
Caution. After using the emergency ejection procedure to remove a cartridge, you
must restart the drive before inserting a new cartridge. Power must be
reapplied to the drive before it will move the loading mechanism into
position for inserting a new cartridge.
Setting the write-protect switch
Travan minicartridges feature a sliding write protect tab located in the upper left
corner of the cartridge. You can set the tab to keep data from being written on the
tape. Use this switch when you want to make sure that important data on the tape
will not be overwritten.
Figure 13 shows the cartridge with the switch in the non-protected (read/write) or
unlocked position.
Figure 13
Travan cartridge write-protect switch—unlocked position
Figure 14 shows the tab in the protected (read only) or locked position.
Figure 14
Travan cartridge write-protect switch—locked position
To return a cartridge to the "writeable" state, push the switch toward the end of the
cartridge or to the unlocked position.