Omega ILD44-UTP - Manual (Page 52)

48
3.2.13 ID CODE
Figure 3.12 Flow Chart for ID Code
ENTER ID CODE MENU:
Press a 1) Press a, if necessary, until CNFG prompt appears.
Press d 2) Display advances to INPT Input Menu.
Press a 3) Press a, if necessary, until Display advances to ID ID Code
Menu.
ENTERING OR CHANGING YOUR (NON-DEFAULT) ID CODE:
Press d 4) Display advances to ____ with 1 st under score flashing.
Press b & c 5) Press b and c to enter your 4-digit “ID Code” number.
Press d 6) Display advances to CH.ID Change ID Code Submenu.
If entered “ID Code” is incorrect display shows ERRo Error
message momentarily and then skips to the Run Mode.
Press d 7) Display flashes the first digit of previous entered “ID Code”
number.
Press b & c 8) Press b and c buttons to enter your new “ID Code” number.
Press d 9) Display shows STRD stored message momentarily and then
advances to the FULL Full Security Submenu.