Oki 520 - Manual (Page 29)

E-22 Section 3
Print Mode
The seven buttons to the left on your control panel are
multi-function buttons. In the print mode, they are used
to manipulate the paper (see the illustration on the first
page of this chapter).
The PRINT QUALITY and CHARACTER PITCH buttons
on the right side of the control panel are used to select
the quality and size of the printing.
" The print quality and character pitch set by means of
the front panel can be overridden by commands sent
by the commercial software package from which
you’re printing a document. If you run into this prob-
lem, see page 38 for information on how to correct it.
Selecting Print Quality
PRINT QUALITY
HSD UTILITY NLQ
Press the PRINT QUALITY button successively until the
light underneath the print quality you wish to engage is
lit:
Print Quality HSD UTILITY NLQ
Typeface Gothic Gothic Courier or Gothic
Print Speed Fastest Fast Slowest
Quality Lowest Medium Highest
Used for Data reports Rough drafts, Correspondence,
on continuous internal memos documents requir-
forms paper ing a polished
appearance
" Your printer also prints bar codes accessible through
printer commands. The Microline Reference Manual
provides complete lists of all the commands, along
with information on their use.You may view this
document by accessing it on the CD provided with
your printer.