Install/replace the ribbon cartridge, Install/replace the ribbon, Cartridge – Oki 520 User Manual

Page 10

Getting Started

E-3

4. Remove the styrofoam shipping retainer, then lower

the paper separator and press it into place.

It is recommended that the printer be switched off
prior to opening or removing the access cover.

Install/Replace the Ribbon

Cartridge

3 Be sure to use only ribbons specifically designated for

MICROLINE 520/521 printers. For the best results, use
genuine Okidata ribbons, Part No. 52107001.

Caution! If you are replacing the ribbon, the
printhead may be

HOT

HOT!

1. With the access cover open, slide the printhead (

Ê) to

the center of the platen.

If you’re replacing the ribbon, lift up the
cartridge at the end nearest the platen, then
remove and discard it.