Cleaning the housing – Oki 520 User Manual

Page 24

Maintaining Your Printer

E-17

Cleaning the Housing

You should clean the printer every six months (or after
about 300 hours of operation).

1. Turn the printer OFF.

2. Remove the paper from the path.

3. Open the access cover and remove the pull-up roller

assembly.

4. Use a clean, dry cloth to dust the area around the

carriage shaft and platen. Be sure to remove any loose
particles of paper.

5. Reinstall the pull-up roller assembly.

6. Close the access cover.

Never use solvents or strong detergents on the
cabinet — they could damage the housing.