Loading rear-feed paper – Oki 520 User Manual

Page 14

Text mode
Original mode

Getting Started

E-7

Loading Rear-Feed Paper

The rear-feed path is recommended for printing reports,
etc., on single-thickness, continuous fan-fold paper. For
graphics or charts, it’s best to use the single-sheet paper
path.

4 If you have any paper in the paper path, be sure to

remove it from the path before installing rear-feed
paper!

1. Move the paper lever to the position marked “REAR”.

2. Grasp the front edge of the paper separator (

Ê) and

pull it up to access the tractors.

3. Pull up on the tractor lock levers (

Ë) to release them,

then open the tractor covers (

М).