Onkyo TX-DS575x - Manual (Page 6)

6
Audio equipment connections
•
On each pair of input jacks, a red connector (marked R) corresponds to the right
channel, and a white connector (marked L) to the left channel.
•
Please refer to the instruction manual of each component when making any con-
nections.
•
This receiver is designed for use with turntables using moving magnet cartridges.
•
Insert the plugs and connectors securely. Remember that improper connection
can result in noise, poor performance, or damage to the equipment.
L (Left)
R (Right)
L
R
Audio connection cable
REMOTE CONTROL
SURROUND
CENTER
SPEAKER
SUB
WOOFER
MULT I CH I NPUT
FRONT
CENTER
R
L
R
L
R
R
L
L
FRONT
SPEAKERS
A
AM
FM
75
ANTENNA
C D
(PLAY)
(REC)
MONITOR
OUT
SUBWOOFER
PRE OUT
DVD
TAPE
VIDEO 1
VIDEO 2
VIDEO 3
I N
OUT
OUT
I N
I N
I N
I N
PHONO
R
L
GND
R L V S
V S
AV RECEIVER
MODEL NO. TX-DS575X
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
AVIS
SURROUND
SPEAKERS
R
L
R
L
FRONT
SPEAKERS
B
AC OUTLETS
AC 230V 50Hz SWITCHED
TOTAL 100W MAX.
R L
DIGITAL INPUT
COAXIAL 1
COAXIAL 2
OPTICAL 1
OPTICAL 2
INPUT
(REC)
OUTPUT
(PLAY)
Tape Deck Turntable
CD Player
OUTPUT
(ANALOG)
DIGITAL COAXIAL OUTPUT
OUTPUT Ground
To wall
outlet
Do not plug in the power
cord until all connections
have been made.
Improper connection
Insert completely
See page 7
: signal flow
DIGITAL OPTICAL OUTPUT
•
A DVD or other component equipped with a digital output can be connected to this receiver. The digital connection must be
used in conjunction with an analog connection, because if the analog cable is disconnected, the audio output from TAPE OUT
(REC) and VIDEO 1 OUT will not work.
•
Remove the protective cap attached to the DIGITAL INPUT OPTICAL jack before making the connec-
tion. When this jack is not used, replace the protective cap.