Onkyo TX-DS575x - Manual (Page 33)

33
Using the remote controller
Note:
Make sure that you point the transmission part on the remote con-
troller toward the sensor area on the MD recorder.
1. Press the MODE MD/AUX button.
2. Press the desired MD operation button.
Turning the power on and off to the MD recorder
ON/STNBY : Turning on or standby the power to the MD
recorder
MD operation buttons
: Track Down
: Track Up
: Playback
: Stop
: Fast reverse
: Fast forward
: Record
: Pause
EJECT : Eject
1~9, +10 : Numeric keys
ENT : Confirm
You may also use the following buttons:
VOL q/u : Adjusting the volume level of the TX-
DS575X
MUTING : Muting the sound from the TX-DS575X
Note:
First connect an Onkyo tape deck using the
connection. (See
page 9.)
1. Press the MODE AUDIO/TAPE button.
2. Press the desired tape deck operation button.
TAPE operation buttons
: Playback
: Stop
: Fast rewind
: Fast forward
: Recording/pause
: Reverse play
You may also use the following buttons:
VOL q/u : Adjusting the volume level of the TX-
DS575X
MUTING : Muting the sound from the TX-DS575X
No preset codes are programmed into the MODE SAT, CABLE,
VCR, and TV buttons. You can use these buttons to program
remote controller signals of other devices. (See page 34.)
You may use the following buttons:
VOL q/u : Adjusting the volume level of the TX-
DS575X
MUTING : Muting the sound from the TX-DS575X
Controlling an Onkyo MD recorder
Controlling an Onkyo tape deck
MODE SAT, CABLE, VCR, and TV buttons
REC
REC
MODE MD
MD
operation
buttons
Numeric keys,
ENT button
MODE
AUDIO
TAPE
operation
buttons
MODE SAT,
CABLE, VCR,
TV