Onkyo TX-DS575x - Manual (Page 32)

32
Using the remote controller
Note:
First connect an Onkyo CD player using the
connection.
1. Press the MODE CD button.
2. Press the desired CD operation button.
CD operation buttons
TRACK : Selecting a track
DISC : Selecting a disk in the CD changer
: Track Down
: Track Up
: Playback
: Stop
: Fast reverse
: Fast forward
: Pause
EJECT : Eject
0, 1~9, +10 : Numeric keys
You may also use the following buttons:
VOL q/u : Adjusting the volume level of the TX-
DS575X
MUTING : Muting the sound from the TX-DS575X
Note:
Make sure that you point the transmission part on the remote con-
troller toward the sensor area on the DVD player.
1. Press the MODE DVD button.
2. Press the desired DVD operation button.
ON/STNBY : Turning the power on and off to the DVD
player
DVD SET : DVD setup
DVD player on-screen button
MENU : Displaying the menu
ququ : Moving the cursor
ENTER : Confirming the selection
RETURN : Return
DVD operation buttons
: Track/Chapter Down
: Track/Chapter Up
: Playback
: Stop
: Fast reverse
: Fast forward
: Pause
EJECT : Eject
0, 1~9, +10 : Numeric keys
ENT : Confirm
You may also use the following buttons:
VOL q/u : Adjusting the volume level of the TX-
DS575X
MUTING : Muting the sound from the TX-DS575X
Note:
The ENT button on the right below the numeric keys has the same
function as “ENTER” of the ENTER/cursor button.
Controlling an Onkyo CD player
Controlling an Onkyo DVD player
MODE CD
CD
operation
buttons
Numeric keys
MODE DVD
DVD
operation
buttons
Numeric keys,
ENT button