Onkyo TX-DS575x - Manual (Page 24)

24
Tuning in a radio station
FM
AM
TUNING DOWN/UP
FM MUTE/MODE
DISPLAY
OFF ON
STANDBY
POWER
STANDBY/ON
BASS TREBLE
UP
D O W N
PHONES
AV RECEIVER TX-DS575X
SPEAKERS A B
MASTER VOLUME
PRESET / MODE ADJ
ENTER / SCAN
DOW N UP
SP / SYS SETUP
MODE
TUNING UP DOWN CH LEVEL MEMORY FM MUTE / MODE
LATE NIGHT / FRONT EFFECT DISPLAY STEREO 5 CH STEREO DSP LISTENING MODE LFE LEVEL
CONTROL /DTS SURROUND Re -EQ
DIGITAL/
ANALOG PTY/TP
FM AM PHONO C D TAPE DVD MULTI CH INPUT VIDEO 3 VIDEO 2 VIDEO 1
1. Press the FM or AM button.
2. Use the TUNING UP/DOWN buttons to change the fre-
quency.
UP .................... the frequency increases.
DOWN ............. the frequency decreases.
•
The frequency changes in 50 kHz steps in FM and 10 kHz (or
9 kHz) in AM each time you press the TUNING UP/DOWN
button.
•
In FM, if this button is held continuously for more than 0.5 sec-
onds, the frequencies are scanned automatically (FM auto tun-
ing mode). When a broadcast is received, scanning stops.
When you tune in a stereo FM station, the FM STEREO indicator
lights up if the signal is sufficiently strong.
If the signal is weak, it may be impossible to tune in to the desired
station. In this case, tune in as follows.
Press the FM MUTE/MODE button. The FM MUTE indicator
turns off. At this time, the station will be in mono and interstation
noise will be heard. Select the station to which you want to listen.
Pressing the DISPLAY button each time will change the indication
as follows:
Frequency (preset No.)
↔
Listening mode
Manual tuning
Listening to a stereo radio station (FM mode)
DISPLAY button
FM AM
1
2
TUNING UP DOWN
ch
FM MUTE /
MODE
DISPLAY