Onkyo TX-DS575x - Manual (Page 22)

22
Using Listening Mode
AV RECEIVER TX-DS575X
TREBLE BASS
PHONES
OFF ON
STANDBY/ON
STANDBY
SPEAKERS A B
FM AM PHONO C D
TAPE
DVD MULTI CH INPUT
VIDEO 3 VIDEO 2 VIDEO 1
U P
DOWN
MASTER VOLUME
POWER
SP / SYS SETUP
MODE
TUNING UP DOWN CH LEVEL MEMORY FM MUTE /
MODE DIGITAL/
ANALOG PTY/TP
DOWN UP
PRESET/MODE ADJ
ENTER/SCAN
LATE NIGHT / FRONT EFFECT
DISPLAY
LFE LEVEL CONTROL STEREO 5 CH STEREO DSP LISTENING MODE
/DTS SURROUND Re -EQ LATE NIGHT / FRONT EFFECT LFE LEVEL CONTROL STEREO 5 CH STEREO DSP LISTENING MODE
/DTS SURROUND Re -EQ
VOL button (qup/udown)
Use this button to adjust the volume level.
1. Input selector buttons
Select the desired input source. 2. LISTENING MODE buttons
These button allow you to select a
listening mode.
3. Use these buttons to
set the Listening mode
parameters.
(Refer to page 23).
VOLUME knob
Use this knob to adjust
the volume level.
3. Listening mode button
These buttons allow you to select a Surround mode.
2. INPUT SELECTOR buttons
Select the desired input source.
CH SEL/LEVEL+/– buttons
1. Press the MODE
AUDIO button
1. Press one of the INPUT SELECTOR buttons to select the
desired sound source.
2. Use the LISTENING MODE buttons to select the desired
Listening mode.
STEREO: Press this button to listen to a normal stereo audio.
/DTS SURROUND: Press this button when you wish to
play Dolby ProLogic, Dolby Digital, or DTS Surround sound.
5CH STEREO: Press this button to play 5-ch stereo sound (see
page 21).
DSP √/®: Press this button repeatedly to select the desired
Listening mode. Each option appears as shown at left.
3. Play the selected source.
Notes:
•
Select a digital input to play Dolby digital or DTS sound
sources. (See page 18.)
•
You cannot select Orchestra, Unplugged, Studio-Mix, TV
Logic, or 5ch Stereo if you have selected a Dolby digital or
DTS surround source.
•
To play a Dolby digital or DTS Surround source, you need to
connect the sound source using the digital input connector.
•
When you play the Dolby Digital or DTS Surround source, the
TX-DS575X automatically enters Dolby Digital Surround (ste-
reo) or DTS Surround (stereo) mode respectively.
Follow the steps below to make adjustment to the speaker level
set by the Test Tone.
1. Press the MODE AUDIO button.
2. Press the CH SEL button to select a speaker.
3. Press the LEVEL +/– buttons to adjust the level.
Using Listening Mode
1
2
STEREO 5 CH STEREO DSP
LISTENING MODE
/DTS SURROUND
FM AM PHONO C D TAPE DVD LTI CH
PUT
VIDEO 3 VIDEO 2 VIDEO 1
Playing the DOLBY DIGITAL source
Dolby Digital Dolby Digital (stereo)
Playing the DTS source
DTS DTS (stereo)
STEREO
PRO LOGIC
5ch STEREO
ORCHESTRA
UNPLUGGED STUDIO-MIX TV LOGIC
(Dolby Pro Logic)