Problems printing from macintosh, Cannot configure for usb connection – Oki 2024/2024e User Manual
Page 198
ES 2024/2024e Troubleshooting • 198
PROBLEMS PRINTING FROM MACINTOSH
Cannot configure for USB connection.
Possible cause
Remedy
USB cable does
not meet
specifications.
Use USB cable to specification Ver.1.1.
Interface is
disabled.
Check that USB interface is set to Enable.
Configuration
procedure was not
correctly followed
or cancelled.
Configure again from the beginning.
USB cable is
disconnected or
faulty.
Reconnect or try another cable.
A USB hub is being
used.
The printer cannot be used with a USB hub.
Connect the printer and computer directly.
See also other documents in the category Oki Printers:
- C6050 (40 pages)
- B 6200 (32 pages)
- C5540MFP (1 page)
- C3530MFP (138 pages)
- B4545 MFP (154 pages)
- B4600 Series (104 pages)
- C5250 (83 pages)
- C 7300 (12 pages)
- C 5200n (82 pages)
- 5650 (2 pages)
- B6000 (6 pages)
- PRINTING SOLUTION B2400 (36 pages)
- B6000 Series (8 pages)
- B4000 (2 pages)
- 520 (68 pages)
- C5000 (6 pages)
- 80 Series (97 pages)
- Pos 407II (65 pages)
- OFFICE 87 (40 pages)
- C5900n (6 pages)
- LAN 510W (44 pages)
- 490 (94 pages)
- B 410d (84 pages)
- 42625502 (1 page)
- 84 (99 pages)
- 3391 (35 pages)
- C 130n (172 pages)
- C8800 (87 pages)
- C8800 (179 pages)
- B8300 (95 pages)
- 390 (135 pages)
- 390 (131 pages)
- ES3640E (220 pages)
- ES3640E (24 pages)
- 1220n (207 pages)
- C5200 (2 pages)
- OFFICE 86 (4 pages)
- CX 1145 MFP (177 pages)
- 8c Plus (24 pages)
- FAX 740 (80 pages)
- PRINTER MPS420B (74 pages)
- C 7200 (2 pages)
- B4000 Series (2 pages)
- 2500 (80 pages)