beautypg.com

Dismounting the ppo-e05 – Olympus PPO-E05 User Manual

Page 13

background image

EN 4

En

3. Dismounting the PPO-E05

1

If any water is on the product, wipe it completely away and
make sure that the product is dry.

2

Holding the PT-E series case firmly with one hand, loosen the
PPO-E05 by turning it about 90 degrees counterclockwise. If
the PPO-E05 is attached too tightly to turn, wrap it with a piece
of rubber or similar non-slip material, and turn it
counterclockwise.

3

After loosening the PPO-E05, point its lens downward and turn
it further counterclockwise until it is separated from the PT-E
series case. Be careful not to drop the PPO-E05 or PT-E
series case.

CAUTION:

• While dismounting the PPO- E05 from the case, water remaining on the PPO-E05 may splatter on the lens

or camera. If this happens, wipe the water off the lens and camera with a dry cloth.

• Make sure that the port is completely dry before dismounting.

PPO-E05_EN-01.fm Page 4 Tuesday, March 20, 2007 6:55 PM