Name of parts – Olympus PPO-E05 User Manual
Page 11
EN 2
En
CAUTION
z
Do not expose this product to high temperatures for extended periods. This may lead to deterioration
of the product’s components.
z
When mounting this product on the PT-E series waterproof case, be sure to follow the steps described
in this manual.
z
Before detaching this product from the PT-E series waterproof case, make sure that the case is
completely dry and free of moisture.
z
Never attach or detach this product in locations where there is a lot of sand, dust or dirt. If any foreign
matter gets on the O-ring sections, the waterproof sealing will be compromised and water leakage
may result.
z
This product has been designed to be used underwater at depths up to 40 meters. Please note that
diving in depths over 40 meters may cause irreparable damage and/or may result in water leaking into
this product and the camera and lens.
z
The maximum depth that this product can be used is 40 meters, regardless of what case it is combined
with. For example, even when combined with a PT-E series case certified for 60 meters, the maximum
depth is still limited to 40 meters.
z
When sealing this product, make sure that no foreign matter is caught on the O-rings or O-ring contact
surfaces.
z
Before storing this product, always remove it from the camera and lens.
z
To control lens zooming from this product, the provided zoom gear must be attached to the zoom ring
of the lens. Correctly attach the zoom gear to the zoom ring of the lens as instructed in this manual.
1. Name of Parts
1
PPO-E05 main body
2
Silicon O-ring (POL-E101)
3
Front cap
4
Rear cap
5
Zoom gear (PPZR-E06)
6
Grease for silicone O-ring
7
O-ring remover
PPO-E05_EN-01.fm Page 2 Tuesday, March 20, 2007 6:55 PM