O'Neil microFlash Series - Manual (Page 33)

User Manual and Technical Guide The O'Neil microFlash Series of Printers
•
23
microFlash Configuration
The microFlash Configuration Program disk included with the
microFlash series of printers allows you to configure your printer to any
environment. Use the Configuration Program to prepare your printer to
print a variety of fonts and graphics, to select the paper, to communicate
wirelessly, and so on. Setup configurations chosen here can be saved
under different file names for different applications.
Windows 3.1 Installation
Insert the microFlash configuration software in a floppy drive. Next,
open the Program Manager in Windows.™ Now open the File Menu.
Select RUN... At the prompt, enter:
A:\Setup (or B:\ to determine the floppy drive).
Once the microFlash Main Menu is open, Install should be highlighted.
Press the OK button. Select the drive you would like to store the
configuration program on. We suggest your hard drive.
The computer will then install the configuration files. The Main Menu
will reappear. Select Exit and click on OK .
3