Oki 6E - Manual (Page 31)

2 - 16
2.5.3 Process Operation Descriptions
(1) Hopping and Feeding
Hopping and feeding motions are actuated by a single registration motor in the mechanism
as shown below:
The registration motor turning in direction "a" drives the hopping roller. The registration motor
turning in direction "b" drives the registration roller. The registration and hopping gears have
one-way bearing, so turning any of these gears in the reverse direction will not transmit the
motion to the corresponding roller.
Motor gear
Hopping gear
Hopping roller
Registration roller
Idle gear
Registration gear
Registration motor
a
b