Oki 6E - Manual (Page 130)

6 - 30
[JAM error]
2 -2 Paper feed jam
• Does the paper feed jam occur when the power is turned on?
• Yes Is the paper on the paper sensor lever?
• Yes Remove the paper.
▼
• No Is the operation of the paper sensor lever normal (moves freely when
touched)?
• No Replace the paper sensor lever.
▼
• Yes Replace the power supply board.
▼
• No Has the paper reached the paper sensor lever?
• No Is the registration roller rotating?
• No Replace the one-way clutch gear.
▼
• Yes Is the image drum unit being set properly?
• No Set the image drum unit properly.
▼
• Yes Check the hopping roller assembly or separator assy.
▼
• Yes Has the paper reached the outlet sensor lever?
• Yes Is the operation of the outlet sensor lever normal (moves freely when
touched)?
• No Replace the outlet sensor lever.
▼
• Yes Clean the outlet sensor on the power supply board or replace the
power supply board.
▼
• No Is the drum motor rotating?
• No Is connector CN2 on the Main Control PCB being connected?
• No Connect connector CN2 properly.
▼
• Yes Is the coil resistance (normal resistance: about 12.6
Ω
) of the drum motor
correct (refer to 7.3)?
• No Replace the drum motor.
▼
2 -2-a 2 -2-b