Oki 6E - Manual (Page 222)

E - 11
3.3.2 Separator
(1) Turn the power switch off “O” and remove the connector cord.
(2) Disengage the link and paper feeder cover (see 3.3.1).
(3) Remove the 2 screws
1 , disengage the locks at 2 locations on the upper frame 2 with a
screwdriver, and remove the upper frame 2 .
(4) Remove the 2 screws 3 , and take out the separator assembly 4 .
(5) Disengage the separator 7 from the separator bracket 6 while lifting the paper hold 5 , and
take out the separator
(be careful not to lose the spring 8 when you are doing this).
1
Lock
3
Lock
2
2
Screwdriver(-)
4
6
5
7
8