Outback Power Systems FX 2012T - Manual (Page 37)

Copyright 2003  OutBack Power Systems, Inc. FX & VFX Series Inverter/Charger System Installation & Programming Manual
19009 62 nd Ave NE, Arlington WA 98223 USA 900-0027-1
Tel 360 435 6030 Fax 360 435 6019 Rev 7.2 08/26/05
Page 37
MATE – SYSTEM CONTROLLER AND DISPLAY
‘SOFT’ KEYS
The four buttons under the LCD are referred to as the ‘soft’ keys. Their operation is dependent on what their label says. The label is the
word on the bottom line of the LCD directly above the button.
Soft keys used to navigate the menus are commonly labeled , , , , or .
Soft keys that change settings are labeled either with the change they will make, such as : , , and , or if there are
more then a couple values that the setting can be changed to, and are used to mean increase and decrease,
respectively.
SETUP/FX/INPUT---P00
ac transfer
GEN
control
DOWN
GRID GEN PORT
In this example, pressing will take you to the next set point screen in
the SETUP/FX/INPUT menu.
SETUP/FX/INPUT---P00
Input setup
completed
TOP SETUP MAIN
In this example, pressing will take you to the first screen in the
SETUP/FX/INPUT menu. will return you to the SETUP/FX screen,
and
SETUP/FX/INPUT---P00
ac transfer
GEN
control
DOWN
GRID GEN PORT
In this example, pressing will change the FX AC transfer control to
GRID mode. Conversely, pressing will change the FX AC transfer
control to GEN mode.
SETUP/FX/INPUT---P00
ac1/grid
60.0 aac
limit
DOWN
INC DEC PORT
In this example, pressing or will change the numerical value of
the ac1/grid limit setting.
ADV/FX/AUX-------P00
aux output
CoolFan
function
DOWN
INC DEC PORT
In this example, there are multiple operating modes for the aux output function.
Pressing or will cycle through the available modes.