Omega RD260A User Manual
Page 44
4 - 19
4. DAILY OPERATION/MAINTENANCE
NOTE
If the [ENT] key is pressed while setting the numeric codes, the indication
changes to [
], and the numeric codes already set stay valid.
However, pressing the [ESC] key turns them invalid.
(10) The indicator displays [
], and the dot carriage will move to the adjusted
position.
Confirm the dot carriage position and press the [ENT] key.
(11) The indication returns to [
] or [
]. When you want to carry out the
position adjustment again, press the [ENT]key and carry out step (9) again. When
another adjustments are required, select [
], [
] or [
] again
by pressing the [
] key. In order to finish the adjustment, press the [ESC] key to
return to the [
] indication.
(12) Before leaving the SET UP mode, its contents should be stored.
Select [
] by pressing the [
] key, and press the [ENT] key.
(13) Select [
] to keep setting values valid, or select [
] to abort
them by pressing the [
] key, and press the [ENT] key.
The SET UP mode finishes, and several seconds after, the mode returns to the
OPERATION mode.