Omega RD260A - Manual (Page 15)

2 - 3
2. INSTALLATION
2.1 Installation Site and Mounting Methods
2.1.3 External Dimensions
Unit: mm
Unless otherwise specified, dimensional tolerance is ±3%;
however, for less than 10 mm, it is ±0.3 mm.
Multi-mounting(vertical)
Panel thickness 2 to 26 mm
(Dimension before mounting)
(Dimension after mounting)
Panel cutout
Panel cutout for single installation Multi-mounting(horizontal) Multi-mounting, maximum 3 units(vertical)
175 minimum
Number of unit
175 minimum
Panel Cutout and External Dimensions (Including Mounting Brackets)
NOTE A pair of mounting brackets should be used on the top and bottom, or on both
sides of the recorder.