Omega RD260A - Manual (Page 54)

6 - 3
6. SET MODE
SKIP Setting
Unused channels can be skipped, which means that these channels will not be measured,
recorded or displayed.
Key operation Indication Description
Press the [DISP] key for three seconds to enter the SET mode.
Select the [
] display by using the [ ] key.
Then press the [ENT] key.
Use the [ ] key to select the desired channel.
Press the [ENT] key.
Use the [ ] key to select [ ].
Press the [ENT] key.
[ ] is displayed and the setting is completed.
Press the [ENT] key to set another channel; or press the
[DISP] key to three seconds to return to the OPERATION
mode.
NOTE If you press the [ESC] key in the middle of setting, the indication returns to the
[ ] and already set data will be aborted.
6.1 Setting Input Range and Recording Span (RANGE)
PRINT
DISP
ESC
3 sec
3 sec DISP
ESC
PRINT
CH UP
PRINT
CH UP
CH UP
CH UP