Oregon Scientific SMARTHEART SE102L User Manual
Page 7
EN
EN
7
EN
EN
2. Strap the chest belt across your chest making sure the
belt sits snugly below your pectoral muscles.
TIPS
•
For accurate heart rate readings, make sure the chest
belt is placed above your heart.
•
Avoid areas with dense chest hair.
•
In dry, cold climates, it may take several minutes for
the chest belt to function steadily. This is normal and
should improve with several minutes of exercise.
NOTE
If the watch is kept idle without receiving a heart
rate signal for 5 minutes, the heart rate mode will quit and
return to clock mode.
TRANSMISSION SIGNAL
The chest belt and watch have a maximum transmission
range of about 62.5 cm (25 inches).
In the event that you experience a weak signal or your signal
is disrupted by interference in the environment:
•
Shorten the distance between the chest belt and watch.
•
Re-adjust the position of the chest belt.
•
Check the conductive pads are moist enough to ensure
solid contact.
ICON
DESCRIPTION
Flashes when signal has been found
Appears when heart rate alert is ON
SE102-SE102L_EN_R3.indd 7
5/30/06 4:09:23 PM