One for All (URC-8910) - Manual (Page 7)

Key Charts
The LED (red light) blinks to show that the
remote control is working and sending signals.
The LCD (Liquid Crystal Display)
provides 15 alphanumeric charac-
ters that display status messages
during remote control operation
and programming.Also, one or
more icons appear in the LCD to
indicate the following conditions:
or Morning or Afternoon Time
Low Battery
IR Signal Transmission
Press TV, VCR, DVD, AUX, SAT, CBL,
RCVR/AMP, or CD once to select a
desired home entertainment
device to control.
After programming, press HOME
THEATER once to select the home
theater mode. See Using The Home
Theater Mode on page 43.
Press POWER once to turn on or off the
selected device.
Use the cursor keys ( ▲ , ▼ , , or ) to move
the cursor in the program guide and menu
screens. Use SELECT to choose options from
your selected device’s menu or guide.
In the CD mode, use SELECT to select a
compact disc. Use
▲ (or ▼ ) to select the next
(or previous) CD. Use (or ) to select the
next (or previous) track.
In the RCVR/AMP mode, use SELECT to
set the surround sound. Use
▲ (or ▼ ) to
adjust the volume higher (or lower). Use
(or ) to adjust the balance left (or right).
Press MENU once to display your selected
device’s main menu.
Use GUIDE to display your selected device’s
program guide or setup menu.
continued on next page...
▲
▲
▲
▲
▲
▲
7
Producer 2002 IR Mnl 4/4/02 10:01 AM Page 7