One for All (URC-8910) - Manual (Page 59)

KEY INDEX
VCR Functions (continued)
Press PREV once to recall the last-viewed
channel and to page back one screen on the
VCR’s main menu.
Use the keypad (1 ~ 9 and 0) to
directly select channels (e.g., 009 or
031). If the original remote control
required pressing an Enter key to
change the channel, also press the
ENTER key after the channel number
(e.g., 0-3-1-ENTER).
Press ENTER once after entering the channel
numbers on some VCRs.
Use TV/VID to switch the TV’s input to view
TV or VCR programs.
Use the transport keys to control
your VCR.
To record a VCR program, press REC
twice.
Use SLEEP to activate your VCR’s sleep
timer (not available for all devices).
After programming, press M1 ~ M3 once to
run a desired macro (see Using Macros on
page 34).
After programming, press L1 ~ L4
once to activate a learned function.
See Using Learning on page 29.
Use PIP to switch the Picture-In-Picture
feature on or off (if available on your TV).
Use MOVE to move the window picture
to different positions in the main picture.
Use SWAP to switch images and sound
between the main and window pictures.
59
Producer 2002 IR Mnl 4/4/02 10:03 AM Page 72