One for All (URC-8910) User Manual

Page 11

For example, to enter the first GE VCR code (on
page 24), press 0 twice, 6 once, 0 once, and then
SELECT once.

If the code is entered correctly, you will see the
[SUCCESS] message.

Press EXIT to exit the programming mode.You will
see an [EXIT SETUP] message as the URC-8910
remote control returns to normal operation.

To verify the code works, aim the URC-8910 remote
control at the desired device, press its device key
once and then press POWER once. The device should
turn off. If it does not respond, repeat steps 2
through 6, trying each code for your brand until you
find one that works. If it still does not work, try
Searching For Your Code on page 27.

NOTE: If the device does not have a POWER key, press the

(Play) key.

Repeat steps 1 through 7 for each device you want
to control. For future reference, write down each
working device code in the boxes below:

TV Code:

VCR Code:

DVD Code:

SAT Code:

CBL Code:

RCVR/AMP
Code:

CD Code:

AUX Code:

Aux. Device
Type:________________________________

Producer 2002 IR Mnl 4/4/02 10:01 AM Page 11