Runco LIGHTSTYLE LS-10I - Manual (Page 77)

Operation
Runco LS-10i Installation/Operation Manual 61
PRE
L
IMINAR
Y
PCE provides the ability to define a custom color gamut in terms of a “white point” and
primary (red, green, blue) and secondary (yellow, cyan, magenta) color points.
What are “color points?” : A “color point” is an x/y coordinate pair that defines a
color’s location on the standard CIE chromaticity graph, shown in Figure 4-12. (CIE
stands for “Commission Internationale de l’Éclairage” (International Commission on
Illumination), the organization responsible for color measurement and management
standards.)
Figure 4-12. CIE 1931 Chromaticity Diagram
• RGB (Red, Green, Blue)/YCM (Yellow, Cyan, Magenta): To precisely adjust the
primary or secondary color points associated with the custom color gamut, choose
RGB or YCM respectively from the PCE sub-menu. Each control operates only on the
color specified. Surrounding colors are linearly interpolated based on their distance
from each of these colors.
• White Balance: To precisely adjust the white point associated with the custom color
gamut, choose White Balance from the PCE sub-menu. These controls operate
identically to the color point controls.
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
x
y
2000 2222 2500 2857
3333
4000
5000
5714
6667
8000
10000
D50
D65
D93
Red
Blue
Green
Cyan
Magenta
Yellow