Figure 3-14 . 12-volt trigger output connection, 14. 12-volt trigger output connection, Pre l iminar y – Runco LIGHTSTYLE LS-10I User Manual
Page 52
36
Runco LS-10i Installation/Operation Manual
PRE
L
IMINAR
Y
Connecting 12-Volt
Trigger Output to External
Theater Equipment
If your home theater contains a retractable screen, screen mask or other 12-volt
trigger-activated equipment, connect it to the 12-volt trigger output(s) as shown in Figure
3-14.
Figure 3-14. 12-Volt Trigger Output Connection
➤
If you are installing an LS-10i with an anamorphic lens, connect the
lens transport to the TRIGGER 2 output. This output is
factory-configured to activate when a wide-screen aspect ratio
(Cinema or Virtual Cinema) is chosen.
Tip
Tip = +12V
Sleeve = Ground
Retractable Screen or other
12-volt trigger-activated
device
3.5-mm
mini plug
+12V Trigger Input