Roland HP-7/3 - Manual (Page 28)

28
Chapter 4. Recording Your Performance
Recording a New Song
Record only the keyboard performance without playing along with a built-in song
or rhythm.
fig.panel4-1
Recording settings (select “USr”)
1
Press the [Song/Tempo] button, getting its indicator to light in red.
The song number appears in the display.
2
Press [+] and [-] buttons simultaneously, and “USr” appears in the
display.
Specifying the tone and tempo for recording
3
Select the tone that you want to play (p. 15).
4
If necessary, turn on the metronome.
Sound the metronome while you set the tempo and beat of the song (p. 18).
5
Press the [ (Rec)] button.
The [ (Rec)] button’s indicator will light, the [ (Play)] button’s indicator will
blink, and you will be in recording-standby mode.
Start recording
6
Recording will start when you either press the [ (Play)] button or play
the keyboard.
The HP-7/3 counts down two measures, then recording starts.
Note that recording will also begin as soon as you play anything on the keyboard,
even if you do not press the [ (Play)] button. There is no count sound played
when you start in this manner.
When recording begins, the [ (Play)] button and [ (Rec)] button indicators will
light. Go ahead and perform on the keyboard.
Stop recording
7
Press the [ (Play)] or [ (Rec)] button.
The indicators for the [ (Play)] and [ (Rec)] buttons will go dark.
Play back the recorded performance
8
Press the [ (Play)] button.
You will hear the recorded performance.
Once again press the [ (Play)] button, and playback will stop.
3 1 5, 7 4 6, 8 2
HP-7
NOTE
If you layer a newly recorded
performance without erasing
the recorded song, the song
tempo and beat will be stored
with the settings that were
recorded first.
NOTE
A performance that was
recorded without using
rhythm cannot be played back
with the rhythm.
If you want to record along
with the rhythm, refer to p. 29.
About the “USr” display
When you stop recording, the
“ ” display will change
to “ ”.
The “.” in the lower right of the
display indicates that there is
already a recorded
performance.
If you record without
specifying the recording track,
the performance will be
recorded to the [1] button.
If you want to record the right
and left hands separately on
separate recording tracks, refer
to “Selecting and Recording
the Track for Each Hand
Separately” (p. 31).
HP-7/3_e.book 28 ページ ２００４年１月２６日 月曜日 午後５時１分