Applying effects to the sound, Adding reverberation to the sound (reverb), Adding richness to the sound (chorus) – Roland HP-7/3 User Manual
Page 21: Changing the amount of effect applied, Adds reverberation to the sound (p. 21), Adds richness to the sound (p. 21)
21
Chapter 2. Performance
Applying Effects to the Sound
fig.panel2-5
■
Adding reverberation to the sound (Reverb)
By applying the reverb effect you can produce a pleasant reverberation, making it
sound as though you were performing in a concert hall.
1
Press the [Reverb] button.
The button’s indicator will light, and a reverb effect will be applied to the sound.
To cancel the reverb effect, press the [Reverb] button, getting its indicator to go dark.
■
Adding richness to the sound (Chorus)
By adding the chorus effect, you can give the sound greater dimension, with more
fatness and breadth.
1
Press the [Chorus] button.
The button’s indicator will light, and a chorus effect will be applied to the sound.
To cancel the chorus effect, press the [Chorus] button, getting its indicator to go dark.
■
Changing the amount of effect applied
The depth of the reverb effect and chorus effect can be adjusted over eight steps.
Changing the depth of the reverb effect
1
Hold down the [Reverb] button and press the [+] or [-] button.
The currently specified value will be displayed.
Higher values will produce a deeper effect.
Changing the depth of the chorus effect
1
Hold down the [Chorus] button and press the [+] or [-] button.
The currently specified value will be displayed.
Higher values produce a deeper effect.
HP-7
The reverb effect setting for
each tone is not remembered.
When you play back a built-in
song, the reverb effect will
automatically be turned on
(the button’s indicator lights).
The chorus effect setting can be
remembered for each tone.
When you turn off the power,
it will return to the original
setting.
NOTE
When using Split performance
(p. 17), the chorus effect will
not be applied to the left-hand
When the power is turned on,
reverb is set to “4,” and chorus
to “4.”
The depth of the reverb effect
for each tone is not
remembered.
The chorus effect depth setting
of each tone can be
remembered. When you turn
off the power, it will return to
the original setting.
HP-7/3_e.book 21 ページ 2004年1月26日 月曜日 午後5時1分