Roland HP-7/3 - Manual (Page 15)

15
Chapter 2. Performance
Performing with a Variety of Sounds
The HP-7 contains 24 different built-in tones. The tones are organized into six tone
groups, which are assigned to the Tone buttons.
The HP-3 contains 20 different built-in tones. The tones are organized into five tone
groups, which are assigned to the Tone buttons.
fig.panel2-1
Selecting a tone group
1
Press any Tone button.
The indicator of the button you pressed will light.
When you play the keyboard, you will hear a sound in the selected tone group.
Selecting variation tones
2
Press the [Variation] button.
Four different tones (numbered 1–4) are assigned to each Tone button. Use the
[Variation] button to select among them.
Each time you press the [Variation] button, the button’s indicator will change color,
and the four sounds will be selected successively.
Some of the number 3 and 4 tones form pairs, which can be layered and sounded
together.
The tone you’ve selected is heard when you finger the keyboard.
Tone number 1 2 3 4
[Variation]
button’s indicator
Dark Red Green Orange
1 2 HP-7
For more details, refer to
“Tone List” (p. 41).
When Dual performance (p.
16) or Split performance (p. 17)
is used, only sound number 1
or 2 can be selected.
If you use Dual performance
or Split performance with a
Tone button for which tone
number 3 or 4 is selected, tone
number 1 will be selected for
that Tone button.
HP-7/3_e.book 15 ページ ２００４年１月２６日 月曜日 午後５時１分