Ricoh AFICIO CL3000DN - Manual (Page 32)

Options
28
1
IEEE 802.11b (Wireless LAN)
Configuration
Configure the printer for using the
IEEE 802.11b (Wireless LAN). The fol-
lowing table shows the control panel
settings and their default values.
These items are included in the "Host
Interface" menu.
In order to use the IEEE 802.11b
(Wireless LAN), select "IEEE 802.11b"
for "LAN Type" in "Network Setup"
of the Host Interface menu, and then
set "IP Address", "Subnet Mask",
"Gateway Address", "DHCP", "Frame
Type (NW)" and "Active Protocol" in
the "Network Setup". For more infor-
mation about setting the items in the
"Network Setup", see the Quick In-
stallation Guide.
AAAA
Press {{{{Menu}}}}.
“Menu” appears on the panel dis-
play.
BBBB
Press
{{{{U U U U}}}} or {{{{T T T T}}}} to display “Host
Interface” menu.
CCCC
Press
{{{{Enter #}}}}.
The following message appears on
the panel display.
DDDD
Press {{{{U U U U}}}} or {{{{T T T T}}}} to display "IEEE
802.11b".
EEEE
Press
{{{{Enter #}}}}.
Be sure that "Comm. Mode" ap-
pears on the panel display.
FFFF
Press
{{{{Enter #}}}}.
The following message appears on
the panel display.
Setting Name Default Value
Comm. Mode 802.11 Ad hoc
Channel • Inch version
(1-11) 11
• Metric version
(1-13) 11
Trans. Speed Auto
WEP Setting Not Active
ZHBS010E
Menu:
Host Interface
Host Interface:
I/O Buffer
Host Interface:
IEEE 802.11b
IEEE 802.11b:
Comm. Mode
Comm. Mode:
*802.11 Ad hoc
ZHBS040E
AresPGBOptionSetup-F_FM.book Page 28 Monday, July 29, 2002 1:12 PM