Ricoh AFICIO CL3000DN - Manual (Page 10)

Options
6
1
❖ ❖ ❖ ❖ Basic model Printer : Interior
1. Printer Hard Disk Type 3000
Install Printer Hard Disk to the con-
troller board.
See p.16 “Printer Hard Disk Type
3000”.
2. User Account Enhance Unit Type
B
See p.38 “User Account Enhance Unit
Type B”.
3. 802.11b Interface Unit Type A
Note
❒ 802.11b Interface Unit, USB2.0 In-
terface Board, Bluetooth Interface
Unit and 1394 Interface Unit can-
not be installed in the printer at the
same time.
See p.25 “802.11b Interface Unit Type
A”.
4. Bluetooth Interface Unit
Note
❒ Bluetooth Interface Unit, USB2.0
Interface Board, 802.11b Interface
Unit and 1394 Interface Unit can-
not be installed in the printer at the
same time.
5. 1394 Interface Unit Type 4510
Note
❒ 1394 Interface Unit, USB2.0 Inter-
face Board, Bluetooth Interface
Unit and 802.11b Interface Unit
cannot be installed in the printer at
the same time.
See p.19 “1394 Interface Unit Type
4510”.
6. Netwok Interface Board Type
3000
Note
❒ Netwok Interface Board, USB2.0
Interface Board, 802.11b Interface
Unit, Bluetooth Interface Unit and
1394 Interface Unit cannot be in-
stalled in the printer at the same
time.
7. Memory Unit Type C (SDRAM
Module)
Install 64MB, 128MB, or 256MB RAM
into the slot on the controller board.
See p.13 “Me m ory U nit Type C
(SDRAM Module)”.
Important
❒ Remove USB2.0 Interface Board
when you install 1394 Interface
Unit, 802.11b Interface Unit,
Bluetooth Interface Unit or Net-
wok Interface Board.
ZHBHA061E
5
6
3
4
2
7
1
AresPGBOptionSetup-F_FM.book Page 6 Monday, July 29, 2002 1:12 PM