RCA CC6271 - Manual (Page 61)

59
Recording
Model CC6271 Only: Built-In Color Enhancement Light (continued)
Replace the Bulb Assembly
Carefully follow the instructions below.
Cautions
The video light and bulb need to cool for approximately 30 minutes after
the camcorder has been used before the bulb assembly is replaced.
Do not touch the light bulb with your fingers. If the bulb is accidentally
touched, wipe it with a soft cloth. A dirty bulb may cause smoke and have
a reduced service life.
To Replace the Bulb Assembly
1. Insert a flat nonmetallic object (such
as a plastic screwdriver) in the hole.
3. Place the new bulb assembly into the
camcorder by inserting the top first
and then slide the assembly into
place.
2. Pull on the sides of the bulb
assembly and remove it from the
camcorder as shown.
Bulb Assembly
1/1000
AUTO
MA
N
HAZE
SHD W
PUSH
SEPIA
FR ON TLIG HT
B A C K LIG HT
FADE TITLE
SP/SLP DA TE/TIME COUNTER QUICK RE PA LY/ PA US E
Plastic
Screwdriver
1/1000
AUTO
MA
N
HAZE
SHD W
PUSH
SEPIA
FR ON TLIG HT
B A C K LIG HT
FADE TITLE
SP/SLP DA TE/TIME COUNTER QUICK RE PA LY/ PA US E
1/1000
AUTO
MA
N
HAZE
SHD W
PUSH
SEPIA
FR ON TLIG HT
B A C K LIG HT FADE TITLE
SP/SLP DA TE/TIME COUNTER QU ICK RE PA LY/ PA US E