Radio Shack 43-3824 - Manual (Page 9)

Installation
9
5. For a wall plate, plug the modular cord’s other
end into the wall plate jack, then align the
base’s keyhole slots with the wall plate studs
and slide the base downward to secure it.
For direct wall
mounting, align
the base’s
keyhole slots with
the mounting
screws and slide
the base
downward to
secure it.
6. Plug the adapter into a standard AC outlet.
7. Press and lift out the handset
holder, flip it over as shown, then
snap it back into place so it holds
the handset.
8. Lift the base’s antenna to a
vertical position.
C ONNECTING , C HARGING AND
R EPLACING THE B ATTERY P ACK
The phone comes with a rechargeable Ni-Cd
(nickel-cadmium) battery pack installed in the
handset, but not connected. Before using your
phone, you must connect the battery pack, then
charge it for about 24 hours.
1. Press up on the latch and lift the battery pack
compartment cover.
2. Lift the battery pack out of the compartment.
43-3824.FM Page 9 Friday, February 28, 2003 6:50 PM