Radio Shack 43-3824 User Manual

Page 35

The Integrated Answering Device

Choosing between the two outgoing

messages
Press

OGM

. Then press

OGM

again when the

outgoing message is played. This switches
between the prerecorded greeting or the personal
greeting. After finishing playing back the message,
a confirmation tone is heard.

Setting the base ringer volume
You have three ringer options. One allows you to
turn the ringer off. The other two are volume
levels.

1. Press

SET/RING

You hear the ringer at the current volume level
([

] High, [

] Low, [

] off) (if you set the base

ringer volume to off, “Ringer off” is announced)
and it is displayed on the base.

2. Press

SET/RING

until the desired ringer option

appears.

3. The system displayed new ringer volume.

Temporarily Mute the Base Ringer
Press

PLAY/STOP

to temporarily mute the

incoming ring. The ringer will sound with the next
incoming call.

Adjusting the speaker volume level
You can adjust the volume of the base speaker by
pressing the

VOL/SEL/

on the

base. Press

VOL/SEL/

for louder or

VOL/SEL/

for softer during the base speaker is being used
except for menu mode.

The numbers

are displayed on the base

indicating the volume levels.

being the softest

and

being the loudest.

NOTE

•

When you have set the
base ringer to off and the
handset is on the base,
you will still hear the
ringer from the handset.

•

When you press

VOL/

SEL/

at 9 or

VOL/SEL/

at 0, an error tone

sounds.

43-3824.FM Page 35 Friday, February 28, 2003 6:50 PM