Radio Shack 43-3824 User Manual
Page 32
The Integrated Answering Device
32
You hear “Ring time” and the current ring time
([
] 2, [
] 4, [
] 6, [
] Toll saver), and it is
displayed on the base. Then you hear the
guidance for setting the ring time.
2. Press
VOL/SEL/
or
VOL/SEL/
until the
desired ring time appears.
3. Press
SET/RING
to select the new ring time.
You hear a confirmation tone, then the
announcement “Ring time” and the new ring
time is announced. After a few seconds, the
system announces “To set record time, press
menu again”.
Selecting the message record time
You have three record time options. The options “
1
minute” or “
4
minutes” set the duration for recording
the incoming messages. “
Announce only
” answers
the call with the preset greeting or your personal
greeting but prevents the caller from leaving a
message.
1. Press
MENU
four times in standby mode.
You hear “Record time” and the current
recording time ([ ] 1 minute, [
] 4 minutes, [
]
Announce only, No recording), and it is
displayed on the base. Then you hear the
guidance for setting the record time.
2. Press
VOL/SEL/
or
VOL/SEL/
until the
desired time appears.
3. Press
SET/RING
to select the new recording
time. You hear a confirmation tone, then the
announcement “Record time” and new
recording time is announced. After a few
seconds, the system announces “To set
message alert, press menu again”.
Announce only feature
43-3824.FM Page 32 Friday, February 28, 2003 6:50 PM