beautypg.com

Controlling the device volume – RocketFish RF-RBREC User Manual

Page 18

background image

18

2

Aim the remote control at the IR sensor on the front lens from a

maximum distance of 23 ft. (7 m) away and the maximum angle of +/- 30

degrees from the center line.

Controlling the device volume

Each device in a Rocketboost network has its own means of
controlling volume output level.

Controlling the device volume

To control the volume from the sender to all devices connected to receivers at the same
time:

1

Set the 4-Channel Lock on the back of the sender to Enable.

Note: Before setting the 4-channel lock to Enable, make sure that you have
connected the receivers to this source. After you enable 4-channel lock, the receivers
will not be selectable.

2

Either press the DEVICE buttons on the remote control or turn the

volume knob on one of the receivers.

To control the volume from the sender to an individual device connected to a receiver:

The volume of an individual device can be changed by adjusting the
volume on the receivers one by one.

1

Set the 4-Channel Lock at the rear sender to Disable.

2

Either press the DEVICE buttons on the remote control or turn the

volume knob on the receiver where you want the volume to change.

TM

TM

RF-RBREC_09-0475_MAN_ENG_V1.fm Page 18 Friday, August 28, 2009 6:20 AM