RocketFish RF-RBREC - Manual (Page 13)

13 RF-RBREC
Tips :
Slide the cable spool (provided) into the slots on the back of the receiver from the top
down.
Before connecting to the AC power outlet, wrap the excessive cable around the spool
until the desired length is free.
Using your wireless receiver
General setup
Caution
: Interference is possible from other devices that operate in the same frequency
band. You may have to move the sender and/or receiver around a bit to find an
interference-free location when using. We recommend placing the receiver at least
two feet away from a router or 802.11n device.
A few configurations are shown here to give ideas for your own
usage.
RF-RBREC_09-0475_MAN_ENG_V1.fm Page 13 Friday, August 28, 2009 6:20 AM