Rosewill RNX-G400 - Manual (Page 39)

Wireless Router RNX-G40 User Manual
3.3.15 Firewall - Port Forwarding
Entries in this table allow you to automatically redirect common network services to a specific machine
behind the NAT firewall. These settings are only necessary if you wish to host some sort of server like a web
server or mail server on the private local network behind your Gateway's NAT firewall.
Screen snapshot - Firewall - Port Forwarding
Item Description
Enable Port Forwarding Click to enable the Port Forwarding security function.
Local IP Address
Protocol
Comments
To forward data packets coming from WAN to a specific IP address that
hosted in local network behind the NAT firewall, fill in the IP address,
protocol, port range and your comments.
The Protocol can be TCP, UDP or Both.
The Port Range for data transmission.
Comments let you know about whys to allow data packets forward to the IP
address and port number.
Apply Changes Click the Apply Changes button to register the ports to port filtering list.
Reset
Click the Reset button to abort change and recover the previous configuration
setting.
Delete Selected
Click to delete the selected port range that will be removed from the
port-filtering list.
Delete All Click to delete all the registered entries from the port-filtering list.
Reset
Click the Reset button to abort change and recover the previous configuration
setting.
- 38 -