Rosewill RNX-G400 - Manual (Page 36)

Wireless Router RNX-G40 User Manual
Enable Web Server
Access on WAN
Click the checkbox to enable web configuration from WAN side.
Enable WAN Echo
Reply
Click the checkbox to enable WAN ICMP response.
Apply Changes Click the Apply Changes button to complete the new configuration setting.
Reset
Click the Reset button to abort change and recover the previous configuration
setting.
Note: PPTP Gateway
Your ISP will provide you with the Gateway IP Address. If your LAN has a PPTP gateway, then enter that
PPTP gateway IP address here. If you do not have PPTP gateway then enter the ISP’s Gateway IP address
above.
3.3.12 Firewall - Port Filtering
Entries in this table are used to restrict certain types of data packets from your local network to Internet
through the Gateway. Use of such filters can be helpful in securing or restricting your local network.
Screen snapshot - Firewall - Port Filtering
Item Description
Enable Port Filtering Click to enable the port filtering security function.
Port Range
Protocol
Comments
To restrict data transmission from the local network on certain ports, fill in the
range of start-port and end-port,and the protocol, also put your comments on
it.
The Protocol can be TCP, UDP or Both.Comments let you know about whys
to restrict data from the ports.
Apply Changes Click the Apply Changes button to register the ports to port filtering list.
Reset
Click the Reset button to abort change and recover the previous configuration
setting.
Delete Selected
Click to delete the selected port range that will be removed from the
port-filtering list.
Delete All Click to delete all the registered entries from the port-filtering list.
Reset
Click the Reset button to abort change and recover the previous configuration
setting.
- 35 -