Rosewill RNX-G400 - Manual (Page 27)

Wireless Router RNX-G40 User Manual
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
Current Access Control List
It shows the registered clients that are allowed to link to this WLAN AP
Router.
Delete Selected
Click to delete the selected clients that will be access right removed from
this WLAN AP Router.
Delete All Click to delete all the registered clients from the access allowed list.
Reset
Click the Reset button to abort change and recover the previous
configuration setting.
3.3.8 WDS Settings
Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet does. To
do this, you must set these APs in the same channel and set MAC address of other AP that you want to
communicate with in the table and then enable the WDS.
Screen snapshot - WDS Setup
- 26 -