Radio Shack 43-3817 - Manual (Page 35)

Answering Syst
em Ope
ration
35
Remote operation stops when someone picks up
the handset or any phone on the same phone line.
1. Dial your phone number and wait for the
system to answer. If the system is not set to
answer calls, it will answer after about ten rings
and sound a series of beeps.
2. When the outgoing message begins (or the
system sounds a series of beeps), press
####
,
then enter your security code within 2 seconds.
3. If the code is correct, the system announces
the number of new and old messages, then “To
play incoming message, press
####
2 . For help,
press
####
0 .”
If the system does not respond, try entering
your code again. If you enter an incorrect code
three times, the system beeps and
disconnects.
4. While the system is beeping, press # and
(within 2 seconds) the number for the desired
command. (See “Remote Commands” on
Page 36.)
±ý
±
"016'"
±
"
If you wait more than 15
seconds between
keypresses, the system
sounds a long beep and
hangs up.