Radio Shack 43-3817 - Manual (Page 34)

Answering Syste
m
Operation
34
5GVVKPI"VJG"5GEWTKV["%QFG
The two-digit remote operation security code
prevents unauthorized remote access to your
messages. The code is preset to 80. To change the
code to any number from 00 to 99:
1. Press MENU twice. The system announces
“Security code,” followed by the currently set
code. The code appears.
2. Repeatedly press or hold down |
6
or
7
| to
change the number.
3. Press SET/RING to store the setting. The
system announces “Security code,” followed by
the newly set code.
To check your code at any time, press MENU twice.
The code appears, and the system announces it.
7UKPI"VJG"6QNN/5CXGT
If the ring time is set to
jI jI jI jI
(toll-saver) (see “Setting
the Number of Rings” on Page 27), the system
answers after two rings if you have new messages
(ones you have not listened to).
If there are no new messages, the system answers
after four rings, so you can hang up before the
system answers and avoid unnecessary long-
distance charges.
If the message memory is full, the system answers
after about ten rings, regardless of the ring time
setting.
7
5+0)
"4
'/16'
"%
1//#0&5
While in remote operation, the system stops all
answering functions and displays
h9 h9 h9 h9
. Answering
functions resume when it is no longer being
operated remotely, if you have not turned the
system off.